Specification sheet Backhoe Loader Ref case-580b-loader-backhoe
Case 580B
The Case 580B is a backhoe loader with an operating weight of 11,000 lb (4,989.52 kg), a 43 hp engine, a 0.92 yd³ (0.7 m³) bucket, and a dig depth of 13.98 ft (4,260 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,000lb
4,989.52kg
Engine power
43hp
32.07kW
Net Power Bucket capacity
0.92yd³
0.7m³
Dig depth
13.98ft
4,260mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 580B sits at the compact end of its class:
- Engine power 43 hp less powerful than 92% (n=282)
- Dig depth 14 ft shallower-digging than 78% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | J.I. Case | |
| Engine Model | G188D | |
| Gross Power | 50hp | 37.3kw |
| Net Power | 43hp | 32.1kw |
| Power Measured @ | 2100rpm | |
| Torque Measured @ | 1900rpm | |
| Net Max Torque | 132lb ft | 179Nm |
| Bore | 3.8in | 95mm |
| Stroke | 4.2in | 105mm |
02 Operational Specification
| Fuel Capacity | 22gal | 83.3L |
|---|---|---|
| Max Weight | 11000lb | 4989.6kg |
| Hydraulic System Fluid Capacity | 11gal | 41.7L |
| Oil System Fluid Capacity | 1.1gal | 3.8L |
| Cooling System Fluid Capacity | 4.2gal | 15.6L |
| Tire Size Front - 2wd / 4wd | 7.50x16 | |
| Rear Tires Size 2wd/4wd | 14.9x24 | |
| Operating Voltage | 12V |
03 Transmission Specification
| Transmission Type | Synchronized shuttle | |
|---|---|---|
| Number Of Forward Gears | 8 | |
| Number Of Reverse Gears | 8 | |
| Max Speed - Forward | 20.8mph | 33.5km/h |
| Max Speed Reverse | 22.8mph | 36.7km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 26gal/min | 98.5L/min |
|---|---|---|
| Relief Valve Pressure | 2200psi | 15168.5kPa |
05 Backhoe Dimensions
| Load Height - Std | 10.83ft in | 3300mm |
|---|---|---|
| Reach From Swivel - Std | 17.52ft in | 5340mm |
| Dig Depth - Std | 13.98ft in | 4260mm |
| Load Height - Ext | 14.77ft in | 4500mm |
| Bucket Dig Force - Ext | 9400lb | 4263.77kg |
| Dig Depth - Ext | 17.98ft in | 5480mm |
| Reach From Swivel - Ext | 25.1ft in | 7650mm |
| Bucket Dig Force - Std | 9400lb | 4263.77kg |
06 Dimensions Dimensions
| Transport Length | 21.66ft in | 6600mm |
|---|---|---|
| Transport Width | 6.4ft in | 1950mm |
| Transport Height | 7.65ft in | 2330mm |
| Wheelbase | 6.53ft in | 1990mm |
| Ground Clearance | 1.15ft in | 350mm |
| Front Wheel Tread Width | 56.7in | 1440mm |
| Height To Top Of Suspended Cab | 5.81ft in | 1770mm |
| Rear Tread Range | 75.99in | 1930mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.57ft in | 2610mm |
|---|---|---|
| Reach At Max Dump Height | 2.04ft in | 620mm |
| Lift Capacity At Full Height | 4000lb | 1814.37kg |
| Bucket Width | 80in | 2032mm |
| Bucket Capacity | 0.92yd3 | 0.7m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.