Specification sheet Backhoe Loader Ref case-580-super-n-loader-backhoe

Case 580 Super N

The Case 580 Super N is a backhoe loader with a 95 hp engine, a 1.01 yd³ (0.77 m³) bucket, and a dig depth of 14.47 ft (4,410 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
95hp
70.85kW
Net Power
Bucket capacity
1.01yd³
0.77m³
Dig depth
14.47ft
4,410mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Case 580 Super N sits above the median for its class:

  • Engine power 95 hp more powerful than 72% (n=282)
  • Dig depth 14.5 ft shallower-digging than 56% (n=256)

Scale drawingdrawn to scale · mm

2680B304C7140A
Side elevation
2680B2170D
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Emissions Certification Tier 4 Final
Fuel Diesel
Fan 9 blade suction , Ratio- 1.4:1
Horsepower - Gross 96.6hp 72kw
Horsepower -Net 95.3hp 71kw
Battery 850 cold-cranking amps
Fuel Tank 34.9gal 132L
Number Of Cylinders 4
Max Speed 23.6mph 38km/h
Engine Make 2239
Engine Model FPT F5BFL413B
Gross Power 97hp 72.4kw
Net Power 95hp 70.9kw
Net Torque 334.2lb ft 453Nm
Power Measured @ 2200rpm
Max Torque 334.2lb ft 453Nm
Torque Measured @ 1400rpm
Net Torque Rise 45%
Net Max Torque 328lb ft 444.8Nm
Aspiration Turbocharged
Displacement 207.5cu in 3.4L
Bore 3.9in 99mm
Stroke 4.4in 110mm
Alternator 160amps

02 Capacities Specification

Front Axle 469.9cu in 7.7L
Engine Oil With Filter 2.2gal 8L
Fuel Tank 34.9gal 132L
Diesel Exhaust Fluid (Def) Tank 3.6gal 13.5L
Cooling System 4.8gal 18L
Rear Axle 3.6gal 13.6L

03 Operational Specification

Backhoe Flow- Gallons 41.3gal/min 156.2L/min
Operating Weight 2wd 16239lb 7365.9kg
Fuel Capacity 42.1gal 159L
Operating Weight 4wd 17226lb 7813.6kg
Hydraulic System Fluid Capacity 31.5gal 119.2L
Oil System Fluid Capacity 3.6gal 13.6L
Cooling System Fluid Capacity 4.8gal 18L
Transmission Fluid Capacity 5.3gal 20L
Front Axle Fluid Capacity 2.1gal 7.7L
Rear Axle Fluid Capacity 3.6gal 13.6L
Turning Radius 11ft in 3352.8mm
Tire Size Front - 2wd / 4wd 11L x 16 / 12 x 16.5
Rear Tires Size 2wd/4wd 19.5L x 24
Operating Voltage 12V
Alternator Supplied Amperage 120amps

04 Performance Specification

Loader Bucket Heaped Capacity 1.1yd3 0.8m3
Dipper Stick Digging Force 8657lb 38.6kN
Boom Lift - Maximum Reach - Retracted Dipper 2837.4lb 1287kg
Dipper Stick Lift Capacity 5822.5lb 2641kg
Bucket Digging Force (Iso) 135.3lb 61.4kg
Arm Breakout Force, Sae 11150.6lb 49.6kN

05 Transmission Specification

Transmission Type Power shuttle syncromesh
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 24mph 38.7km/h
Max Speed Reverse 28.8mph 46.4km/h

06 Tires Specification

Front 12L x 16.5 (4WD)
Rear 17.5 L24 (4WD)

07 Hydraulic Specification

Pump Type Variable Displacement Axial Piston
Pump Flow Capacity 40gal/min 151.5L/min
Relief Valve Pressure 3450psi 23786.9kPa

08 Brakes Specification

Service Brake Wet Disc

09 Backhoe Dimensions

Load Height - Std 12.05ft in 3670mm
Reach From Swivel - Std 18.21ft in 5550mm
Dig Depth - Std 14.47ft in 4410mm
Reach At Load Height - Std 4.63ft in 1410mm
Reach From Swivel - Ext 21.59ft in 6580mm
Dig Depth - Ext 17.95ft in 5470mm
Load Height - Ext 14.38ft in 4380mm
Reach At Load Height - Ext 7.22ft in 2200mm

10 Dimensions Dimensions

Transport Length 23.43ft in 7140mm
Transport Width 7.12ft in 2170mm
Transport Height 10.8ft in 3290mm
Wheelbase 7.06ft in 2150mm
Ground Clearance 1ft in 304mm
Height To Top Of Cab 105.52in 2680mm
Operating Weight 17838 Ibs (8141) kg (4WD)
Turning Radius 11.32ft in 3450mm

11 Loader Dimensions

Clearance At Max Dump Height 8.83ft in 2690mm
Reach At Max Dump Height 2.63ft in 801mm
Dig Depth 172.05in 4370mm
Bucket Capacity 1.01yd3 0.77m3
Lift Capacity At Full Height 7043.77lb 3195kg
Bucket Width 82in 2082.81mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.