Specification sheet Backhoe Loader Ref case-580-super-m-series-iii-loader-backhoe
Case 580 Super M Series III
The Case 580 Super M Series III is a backhoe loader with an operating weight of 17,545 lb (7,958 kg), a 91.19 hp engine, a 1.03 yd³ (0.79 m³) bucket, and a dig depth of 14.42 ft (4,390 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,545lb
7,958kg
Engine power
91.19hp
68kW
Net Power Bucket capacity
1.03yd³
0.79m³
Dig depth
14.42ft
4,390mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 580 Super M Series III sits above the median for its class:
- Engine power 91 hp more powerful than 63% (n=282)
- Dig depth 14.4 ft shallower-digging than 58% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2239 | |
| Engine Model | Family IV 445TA/E3, Tier III certified | |
| Gross Power | 96.6hp | 72kw |
| Net Power | 91.2hp | 68kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Torque Rise | 45% | |
| Net Max Torque | 329lb ft | 446.1Nm |
| Aspiration | turbocharged | |
| Displacement | 272cu in | 4.5L |
02 Operational Specification
| Operating Weight 2wd | 14285lb | 6480kg |
|---|---|---|
| Fuel Capacity | 31.4gal | 119L |
| Max Weight | 17545lb | 7958kg |
| Hydraulic System Fluid Capacity | 29.5gal | 111.5L |
| Oil System Fluid Capacity | 3.6gal | 13.6L |
| Cooling System Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 5.2gal | 19.4L |
| Front Axle Fluid Capacity | 1.5gal | 5.5L |
| Rear Axle Fluid Capacity | 3.6gal | 13.6L |
| Turning Radius | 11ft in | 3350mm |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 | |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5Lx24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Transmission Specification
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 26.1mph | 42km/h |
| Max Speed Reverse | 31.6mph | 50.7km/h |
04 Hydraulic Specification
| Pump Type | gear-type, transmission driven | |
|---|---|---|
| Pump Flow Capacity | 38.1gal/min | 144L/min |
| Relief Valve Pressure | 3050psi | -- |
05 Backhoe Dimensions
| Load Height - Std | 11.17ft in | 3400mm |
|---|---|---|
| Reach From Swivel - Std | 18.08ft in | 5510mm |
| Dig Depth - Std | 14.42ft in | 4390mm |
| Reach At Load Height - Std | 8.75ft in | 2670mm |
| Load Height - Ext | 13.25ft in | 4040mm |
| Bucket Dig Force - Ext | 12821lb | 5815.51kg |
| Bucket Dig Force - Std | 12821lb | 5815.51kg |
| Dig Depth - Ext | 18.25ft in | 5560mm |
| Reach At Load Height - Ext | 11.5ft in | 3500mm |
| Load At Max Lift - Ext | 1350lb | 612kg |
| Load At Max Lift - Std | 2750lb | 1247kg |
| Reach From Swivel - Ext | 21.83ft in | 6650mm |
06 Dimensions Dimensions
| Transport Length | 22.83ft in | 6950mm |
|---|---|---|
| Transport Width | 7.17ft in | 2180mm |
| Transport Height | 10.8ft in | 3290mm |
| Wheelbase | 7.04ft in | 2150mm |
| Ground Clearance | 1.22ft in | 371mm |
| Height To Top Of Suspended Cab | 8.83ft in | 2690mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.83ft in | 2690mm |
|---|---|---|
| Reach At Max Dump Height | 2.5ft in | 763mm |
| Dig Depth | 5.9in | 149mm |
| Bucket Breakout Force | 9164lb | 40.76kN |
| Bucket Width | 82in | 2080mm |
| Bucket Capacity | 1.03yd3 | 0.79m3 |
| Lift Capacity At Full Height | 6182lb | 2804kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.