Specification sheet Backhoe Loader Ref case-580-super-m-plus-series-iii-loader-backhoe
Case 580 Super M+ Series III
The Case 580 Super M+ Series III is a backhoe loader with an operating weight of 18,128 lb (8,223 kg), a 95.22 hp engine, a 1.25 yd³ (0.96 m³) bucket, and a dig depth of 14.83 ft (4,520 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,128lb
8,223kg
Engine power
95.22hp
71kW
Net Power Bucket capacity
1.25yd³
0.96m³
Dig depth
14.83ft
4,520mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 580 Super M+ Series III sits above the median for its class:
- Engine power 95 hp more powerful than 76% (n=282)
- Dig depth 14.8 ft deeper-digging than 59% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2239 | |
| Engine Model | Family IV 445TA/E3, Tier III certified | |
| Gross Power | 96.6hp | 72kw |
| Net Power | 95.3hp | 71kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Torque Rise | 45% | |
| Net Max Torque | 326lb ft | 442Nm |
| Aspiration | turbocharged | |
| Displacement | 272cu in | 4.5L |
02 Operational Specification
| Fuel Capacity | 42gal | 159L |
|---|---|---|
| Operating Weight 4wd | 14905.5lb | 6761kg |
| Max Weight | 18128lb | 8223kg |
| Hydraulic System Fluid Capacity | 31gal | 117.2L |
| Oil System Fluid Capacity | 3.6gal | 13.6L |
| Cooling System Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 5.2gal | 19.4L |
| Front Axle Fluid Capacity | 1.7gal | 6.3L |
| Rear Axle Fluid Capacity | 5gal | 18.6L |
| Turning Radius | 11.3ft in | 3425mm |
| Tire Size Front - 2wd / 4wd | / 12.5/80x16.5 8PR | |
| Rear Tires Size 2wd/4wd | / 21Lx24 10PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Transmission Specification
| Transmission Type | 4-speed synchromesh with hydraulically actual clutches | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 25.5mph | 40.9km/h |
| Max Speed Reverse | 30.6mph | 49.1km/h |
04 Hydraulic Specification
| Pump Type | Piston, variable displacement | |
|---|---|---|
| Pump Flow Capacity | 39.9gal/min | 151L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.42ft in | 3480mm |
|---|---|---|
| Reach From Swivel - Std | 18.41ft in | 5610mm |
| Dig Depth - Std | 14.83ft in | 4520mm |
| Reach At Load Height - Std | 8.67ft in | 2640mm |
| Load Height - Ext | 13.25ft in | 4040mm |
| Bucket Dig Force - Ext | 12821lb | 5815.51kg |
| Bucket Dig Force - Std | 12821lb | 5815.51kg |
| Dig Depth - Ext | 18.25ft in | 5560mm |
| Reach At Load Height - Ext | 11.5ft in | 3500mm |
| Load At Max Lift - Ext | 1350lb | 612kg |
| Load At Max Lift - Std | 2350.13lb | 1066kg |
| Reach From Swivel - Ext | 21.83ft in | 6650mm |
06 Dimensions Dimensions
| Transport Length | 22.83ft in | 6950mm |
|---|---|---|
| Transport Width | 7.75ft in | 2360mm |
| Transport Height | 11.29ft in | 3440mm |
| Wheelbase | 7.04ft in | 2150mm |
| Ground Clearance | 1.21ft in | 366mm |
| Height To Top Of Suspended Cab | 8.92ft in | 2730mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 9.17ft in | 2800mm |
|---|---|---|
| Reach At Max Dump Height | 2.5ft in | 763mm |
| Dig Depth | 1.3in | 33mm |
| Bucket Breakout Force | 9164lb | 40.76kN |
| Bucket Width | 93in | 2360mm |
| Bucket Capacity | 1.25yd3 | 0.96m3 |
| Lift Capacity At Full Height | 6182lb | 2804kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.