Specification sheet Backhoe Loader Ref case-480f-loader-backhoe
Case 480F
The Case 480F is a backhoe loader with an operating weight of 10,932 lb (4,958.68 kg), a 63 hp engine, a 0.08 yd³ (0.06 m³) bucket, and a dig depth of 12.01 ft (3,660 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,932lb
4,958.68kg
Engine power
63hp
46.98kW
Net Power Bucket capacity
0.08yd³
0.06m³
Dig depth
12.01ft
3,660mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 480F sits below the median for its class:
- Engine power 63 hp less powerful than 79% (n=282)
- Dig depth 12 ft shallower-digging than 85% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Case | |
| Engine Model | 4-390 | |
| Gross Power | 69hp | 51.5kw |
| Net Power | 63hp | 47kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1200rpm | |
| Net Max Torque | 186lb ft | 252.2Nm |
| Displacement | 239.3cu in | 4L |
| Bore | 4.1in | 102mm |
| Stroke | 4.8in | 120mm |
02 Operational Specification
| Fuel Capacity | 26.5gal | 100.4L |
|---|---|---|
| Max Weight | 10932lb | 4958.7kg |
| Hydraulic System Fluid Capacity | 10.8gal | 40.9L |
| Oil System Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 4.5gal | 17L |
| Transmission Fluid Capacity | 4.8gal | 17.9L |
| Tire Size Front - 2wd / 4wd | 11L x 16 | |
| Rear Tires Size 2wd/4wd | 17.5L x 24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | Power shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.9mph | 35.2km/h |
| Max Speed Reverse | 19.1mph | 30.7km/h |
04 Hydraulic Specification
| Pump Type | Open center | |
|---|---|---|
| Pump Flow Capacity | 23.9gal/min | 90.5L/min |
| Relief Valve Pressure | 2450psi | 16892.2kPa |
05 Backhoe Dimensions
| Load Height - Std | 8.5ft in | 2590.81mm |
|---|---|---|
| Reach From Swivel - Std | 15.72ft in | 4790mm |
| Dig Depth - Std | 12.01ft in | 3660mm |
| Reach At Load Height - Std | 7.3ft in | 2225.04mm |
| Load Height - Ext | 10.1ft in | 3078.48mm |
| Bucket Dig Force - Ext | 8116lb | 3681.36kg |
| Reach From Swivel - Ext | 17.69ft in | 5390mm |
| Dig Depth - Ext | 14.05ft in | 4280mm |
| Reach At Load Height - Ext | 8.7ft in | 2651.76mm |
| Bucket Dig Force - Std | 8116lb | 3681.36kg |
06 Dimensions Dimensions
| Transport Length | 21.26ft in | 6480mm |
|---|---|---|
| Transport Width | 6.76ft in | 2060mm |
| Transport Height | 19.2ft in | 5850mm |
| Wheelbase | 6.67ft in | 2030mm |
| Ground Clearance | 1.08ft in | 328mm |
| Height To Top Of Suspended Cab | 8.37ft in | 2550mm |
| Front Wheel Tread Width | 62.21in | 1580mm |
| Rear Tread Range | 62.21in | 1580mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.76ft in | 2670mm |
|---|---|---|
| Reach At Max Dump Height | 1.92ft in | 584mm |
| Dig Depth | 4.02in | 102mm |
| Lift Capacity At Full Height | 4572lb | 2073.83kg |
| Bucket Capacity | 0.08yd3 | 0.06m3 |
| Bucket Width | 12.01in | 305mm |
| Bucket Breakout Force | 8330lb | 37.06kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.