Specification sheet Backhoe Loader Ref case-480d-loader-backhoe
Case 480D
The Case 480D is a backhoe loader with an operating weight of 9,302 lb (4,219.32 kg), a 47 hp engine, and a dig depth of 12.01 ft (3,660 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,302lb
4,219.32kg
Engine power
47hp
35.05kW
Net Power Dig depth
12.01ft
3,660mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 480D sits at the compact end of its class:
- Engine power 47 hp less powerful than 89% (n=282)
- Dig depth 12 ft shallower-digging than 85% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | J.I. Case | |
| Engine Model | G188D | |
| Gross Power | 52hp | 38.8kw |
| Net Power | 47hp | 35.1kw |
| Power Measured @ | 2100rpm | |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 138lb ft | 187.2Nm |
| Displacement | 189.2cu in | 3.1L |
| Bore | 3.9in | 97mm |
| Stroke | 4.2in | 105mm |
02 Operational Specification
| Fuel Capacity | 23.5gal | 89L |
|---|---|---|
| Max Weight | 9302lb | 4219.4kg |
| Hydraulic System Fluid Capacity | 10.8gal | 40.9L |
| Oil System Fluid Capacity | 1.8gal | 6.6L |
| Cooling System Fluid Capacity | 3.5gal | 13.2L |
| Tire Size Front - 2wd / 4wd | 7.50x16 | |
| Rear Tires Size 2wd/4wd | 14.9x24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 39amps | |
| Axle Load - Front | 9000lb | 4082.4kg |
| Axle Load - Rear | 13500lb | 6123.5kg |
03 Transmission Specification
| Transmission Type | Power shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.9mph | 33.5km/h |
| Max Speed Reverse | 18.3mph | 29.3km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 23.9gal/min | 90.5L/min |
|---|
05 Backhoe Dimensions
| Load Height - Std | 8.4ft in | 2560mm |
|---|---|---|
| Reach From Swivel - Std | 15.72ft in | 4790mm |
| Dig Depth - Std | 12.01ft in | 3660mm |
| Load Height - Ext | 8.7ft in | 2650mm |
| Dig Depth - Ext | 15.13ft in | 4610mm |
| Bucket Dig Force - Ext | 7747.05lb | 3514kg |
| Bucket Dig Force - Std | 7597.13lb | 3446kg |
| Reach From Swivel - Ext | 18.67ft in | 5690mm |
06 Dimensions Dimensions
| Transport Length | 10.5ft in | 3200mm |
|---|---|---|
| Transport Width | 6.93ft in | 2110mm |
| Transport Height | 10.08ft in | 3070mm |
| Wheelbase | 6.67ft in | 2030mm |
| Ground Clearance | 1.05ft in | 320mm |
| Height To Top Of Suspended Cab | 8.37ft in | 2550mm |
| Rear Tread Range | 66.15in | 1680mm |
| Shipping Weight | 5282.28lb | 2396kg |
| Front Wheel Tread Width | 61.82in | 1570mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.73ft in | 2660mm |
|---|---|---|
| Reach At Max Dump Height | 2.24ft in | 680mm |
| Bucket Breakout Force | 5700lb | 25.36kN |
| Bucket Width | 63.78in | 1620mm |
| Lift Capacity At Full Height | 3000lb | 1360.78kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.