Specification sheet Backhoe Loader Ref case-480c-loader-backhoe

Case 480C

The Case 480C is a backhoe loader with an operating weight of 10,757 lb (4,879.3 kg), a 43 hp engine, and a dig depth of 11.98 ft (3,650 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,757lb
4,879.3kg
Engine power
43hp
32.07kW
Net Power
Dig depth
11.98ft
3,650mm

◆Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Case 480C sits at the compact end of its class:

  • Engine power 43 hp less powerful than 92% (n=282)
  • Dig depth 12 ft shallower-digging than 86% (n=256)

◇Scale drawingdrawn to scale · mm

2590B270C3200A
Side elevation
2590B2030D
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Number Of Cylinders 4
Engine Make J.I. Case
Engine Model G188D
Net Power 43hp 32.1kw
Gross Power 48hp 35.8kw
Power Measured @ 2100rpm
Displacement 189.2cu in 3.1L
Bore 3.9in 97mm
Stroke 4.2in 105mm

02 Operational Specification

Fuel Capacity 22gal 83.3L
Max Weight 10757lb 4879.3kg
Hydraulic System Fluid Capacity 12gal 45.5L
Oil System Fluid Capacity 1.8gal 6.6L
Cooling System Fluid Capacity 5.3gal 19.9L
Tire Size Front - 2wd / 4wd 7.50x16
Rear Tires Size 2wd/4wd 14.9x24
Operating Voltage 12V
Alternator Supplied Amperage 42amps

03 Transmission Specification

Number Of Forward Gears 8
Number Of Reverse Gears 8
Max Speed - Forward 20.4mph 32.7km/h
Max Speed Reverse 25mph 40.2km/h

04 Backhoe Dimensions

Load Height - Std 8.27ft in 2520mm
Reach From Swivel - Std 15.59ft in 4750mm
Dig Depth - Std 11.98ft in 3650mm
Bucket Dig Force - Ext 6192lb 2808.65kg
Dig Depth - Ext 15ft in 4570mm
Reach From Swivel - Ext 18.41ft in 5610mm
Bucket Dig Force - Std 6383lb 2895.29kg
Load Height - Ext 8.67ft in 2640mm

05 Dimensions Dimensions

Transport Length 10.5ft in 3200mm
Transport Width 6.67ft in 2030mm
Wheelbase 6.67ft in 2030mm
Ground Clearance 0.89ft in 270mm
Shipping Weight 5282.28lb 2396kg
Front Wheel Tread Width 61.82in 1570mm
Height To Top Of Suspended Cab 8.5ft in 2590mm
Rear Tread Range 65.75in 1670mm

06 Loader Dimensions

Clearance At Max Dump Height 8.57ft in 2610mm
Reach At Max Dump Height 2.24ft in 680mm
Lift Capacity At Full Height 3000lb 1360.78kg
Bucket Width 73.63in 1870mm
Bucket Breakout Force 5700lb 25.36kN

?Questions & answersfrom this machine's data

What engine does a Case 480C backhoe loader have?
A Case 480C backhoe loader is powered by a J.I. Case G188D engine producing 43 hp (32.1 kW).
How deep can a Case 480C backhoe loader dig?
A Case 480C backhoe loader has a maximum dig depth of 12 ft (3,650 mm).
How much fuel does a Case 480C backhoe loader hold?
A Case 480C backhoe loader has a fuel capacity of 22 gal (83.3 L).
How fast does a Case 480C backhoe loader travel?
A Case 480C backhoe loader has a maximum forward travel speed of 20.4 mph (32.7 km/h).

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.