Specification sheet Backhoe Loader Ref case-480b-loader-backhoe
Case 480B
The Case 480B is a backhoe loader with an operating weight of 8,950 lb (4,059.66 kg), a 37 hp engine, and a dig depth of 12.31 ft (3,750 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,950lb
4,059.66kg
Engine power
37hp
27.6kW
Net Power Dig depth
12.31ft
3,750mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 480B sits at the compact end of its class:
- Engine power 37 hp less powerful than 94% (n=282)
- Dig depth 12.3 ft shallower-digging than 84% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | J.I. Case | |
| Engine Model | G188D | |
| Gross Power | 41.5hp | 31kw |
| Net Power | 37hp | 27.6kw |
| Power Measured @ | 1750rpm | |
| Torque Measured @ | 1250rpm | |
| Net Max Torque | 133lb ft | 180.4Nm |
| Displacement | 189.2cu in | 3.1L |
| Bore | 3.9in | 97mm |
| Stroke | 4.2in | 105mm |
02 Operational Specification
| Fuel Capacity | 22gal | 83.3L |
|---|---|---|
| Max Weight | 8950lb | 4059.7kg |
| Hydraulic System Fluid Capacity | 12gal | 45.5L |
| Oil System Fluid Capacity | 1.1gal | 3.8L |
| Cooling System Fluid Capacity | 4.2gal | 15.6L |
| Tire Size Front - 2wd / 4wd | 7.50x16 | |
| Rear Tires Size 2wd/4wd | 14.9x24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Axle Load - Front | 8500lb | 3855.6kg |
| Axle Load - Rear | 11000lb | 4989.6kg |
03 Transmission Specification
| Transmission Type | Mechanical shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 17mph | 27.2km/h |
| Max Speed Reverse | 21.1mph | 33.9km/h |
04 Hydraulic Specification
| Pump Type | Open center | |
|---|---|---|
| Pump Flow Capacity | 10gal/min | 37.9L/min |
05 Backhoe Dimensions
| Load Height - Std | 9.09ft in | 2770mm |
|---|---|---|
| Reach From Swivel - Std | 15.39ft in | 4690mm |
| Dig Depth - Std | 12.31ft in | 3750mm |
| Bucket Dig Force - Std | 6869.61lb | 3116kg |
| Dig Depth - Ext | 15.59ft in | 4750mm |
| Reach From Swivel - Ext | 18.25ft in | 5560mm |
| Bucket Dig Force - Ext | 5899.57lb | 2676kg |
| Load Height - Ext | 11.03ft in | 3360mm |
06 Dimensions Dimensions
| Transport Length | 9.81ft in | 2990mm |
|---|---|---|
| Transport Width | 5.16ft in | 1570mm |
| Transport Height | 10.08ft in | 3070mm |
| Wheelbase | 6.53ft in | 1990mm |
| Ground Clearance | 1.09ft in | 330mm |
| Rear Tread Range | 63.78in | 1620mm |
| Shipping Weight | 3624.4lb | 1644kg |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.8ft in | 2680mm |
|---|---|---|
| Reach At Max Dump Height | 2.01ft in | 610mm |
| Lift Capacity At Full Height | 2600lb | 1179.35kg |
| Bucket Breakout Force | 5500lb | 24.47kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.