◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Bobcat B250 sits at the compact end of its class:
Engine power32 hpless powerful than 96%(n=282)
Dig depth10.6 ftshallower-digging than 88%(n=256)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
Envelope assembled from published extents that may reflect different machine
configurations (e.g. transport length with operating height).
01 Engine Specification
Engine Make
2334
Engine Model
D1105
Net Power
31.5hp
23.5kw
Aspiration
turbocharged
02 Operational Specification
Operating Weight 4wd
6770lb
3070.9kg
Fuel Capacity
14.5gal
54.9L
Turning Radius
11.9ft in
3605.8mm
Tire Size Front - 2wd / 4wd
10x16.5
Rear Tires Size 2wd/4wd
10x16.5
03 Transmission Specification
Transmission Type
hydrostatic
Max Speed - Forward
4mph
6.5km/h
04 Backhoe Dimensions
Load Height - Std
7.9ft in
2407mm
Reach From Swivel - Std
12.72ft in
3875mm
Dig Depth - Std
10.57ft in
3220mm
Bucket Dig Force - Std
5340lb
2422.19kg
05 Dimensions Dimensions
A Transport Length
19.27ft in
5872mm
C Transport Width
5.25ft in
1600mm
Wheelbase
5.55ft in
1690mm
B Height To Top Of Suspended Cab
7.76ft in
2364mm
06 Loader Dimensions
Clearance At Max Dump Height
6.2ft in
1887mm
Reach At Max Dump Height
3.11ft in
947mm
Dig Depth
5.24in
133mm
Lift Capacity At Full Height
2265lb
1027.39kg
Bucket Breakout Force
4250lb
18.91kN
Bucket Width
63in
1600mm
Bucket Capacity
0.49yd3
0.37m3
?Questions & answersfrom this machine's data
What engine does a Bobcat B250 backhoe loader have?
A Bobcat B250 backhoe loader is powered by a D1105 engine producing 31.5 hp (23.5 kW).
How deep can a Bobcat B250 backhoe loader dig?
A Bobcat B250 backhoe loader has a maximum dig depth of 10.6 ft (3,220 mm).
How much fuel does a Bobcat B250 backhoe loader hold?
A Bobcat B250 backhoe loader has a fuel capacity of 14.5 gal (54.9 L).
How fast does a Bobcat B250 backhoe loader travel?
A Bobcat B250 backhoe loader has a maximum forward travel speed of 4 mph (6.5 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.