Bobcat B100
The Bobcat B100 is a backhoe loader with a 31.5 hp engine, a 0.49 yd³ (0.37 m³) bucket, and a dig depth of 9.25 ft (2,817 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Bobcat B100 sits at the compact end of its class:
- Engine power 32 hp less powerful than 96% (n=282)
- Dig depth 9.3 ft shallower-digging than 93% (n=256)
◇Scale drawingdrawn to scale · mm
Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1105 | |
| Net Power | 31.5hp | 23.5kw |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight 2wd | 5752lb | 2609.1kg |
|---|---|---|
| Fuel Capacity | 14.5gal | 54.9L |
| Turning Radius | 14.1ft in | 4297.7mm |
| Tire Size Front - 2wd / 4wd | 23x8.5x12 | |
| Rear Tires Size 2wd/4wd | 31x15.5x15 |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Max Speed - Forward | 4.8mph | 7.6km/h |
04 Backhoe Dimensions
| Load Height - Std | 7.82ft in | 2381mm |
|---|---|---|
| Reach From Swivel - Std | 11.91ft in | 3630mm |
| Dig Depth - Std | 9.25ft in | 2817mm |
| Bucket Dig Force - Std | 5409lb | 2453.49kg |
05 Dimensions Dimensions
| Transport Length | 17.84ft in | 5436mm |
|---|---|---|
| Transport Width | 5.25ft in | 1600mm |
| Wheelbase | 5.38ft in | 1638mm |
| Height To Top Of Suspended Cab | 7.59ft in | 2311mm |
06 Loader Dimensions
| Clearance At Max Dump Height | 5.75ft in | 1750mm |
|---|---|---|
| Reach At Max Dump Height | 3.95ft in | 1203mm |
| Dig Depth | 2.6in | 66mm |
| Lift Capacity At Full Height | 2250lb | 1020.59kg |
| Bucket Capacity | 0.49yd3 | 0.37m3 |
| Bucket Breakout Force | 3600lb | 16.02kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.